Chapter 1
1. 2. 1.
LED Explanation
You can check the extender's working status by following the LED Explanation table.
Name
(RE)
(2.4GHz)
(5GHz)
(POWER)
(Ethernet)
1. 2. 2.
Port and Button Description
Ports or Buttons
Reset Button (Hole)
RE Button
LED Button
On/Off Button
Ethernet Ports
Status
The extender is connected to the router, and is in a good
Solid Blue
location.
The extender is connected to the router, but is too far away
Solid Orange
from the router.
The extender is connecting to the network via WPS. This process may
Blinking
take up to 2 minutes.
Off
No active connection.
The extender is connected to the 2.4GHz wireless network of
On
your host router.
No 2.4GHz wireless connection.
Off
The extender is connected to the 5GHz wireless network of
On
your host router.
No 5GHz wireless connection.
Off
The extender is on.
On
The extender is initializing.
Blinking
The extender is off.
Off
The Ethernet port is connected.
On
The Ethernet port is not connected.
Off
Press and hold the Reset button until all the LEDs turn on momentarily to reset the
extender to its factory default settings.
Press the WPS button on your host router, and immediately press the RE button on
the extender. The RE LED of the extender should change from blinking to solid on,
indicating successful WPS connection.
To turn all LEDs on or off, press the LED button.
To turn on or off the extender, press the Power button.
Connect your Ethernet-only device to one of the Ethernet ports to join the Wi-Fi
network.
Get to Know About Your Extender
Indication
Description
4