TP-Link RE580D User Manual page 17

Chapter 3
Note:
Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is available on your
extender, please refer to the instructions to set your 5GHz network.
¾ To extend another host network
1. Go to Settings > Wireless
2. Enable Connect to 2.4GHz Network
networks.
3. Select the 2.4GHz host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
· Move the extender closer to your router, and click
· You can manually enter the parameters of the network you want to extend, and click Save.
4. Once a host network is selected, the SSID and security type will be automatically
filled in. If the selected network is encrypted, enter the password in the
field.
5. Click Save.
¾ To enable or disable the extended network:
1. Go to Settings > Wireless
2. The wireless radio is enabled by default. If you want to disable the wireless function
of a certain band, just clear the
of this band will be invalid.
3. Click Save.
> Connect to Network.
and click
Rescan on the top-right corner of the list.
> Extended Network.
Enable checkbox. In this case, all the wireless settings
Customize Your Network
Wireless Scanner to find all available
Password
15