Always wash immediately after use.
Don't let food dry onto the goblet
assembly as this will make cleaning
difficult. However, if food has
accidentally been left to dry on,
loosen it by filling the goblet with
1 litre of water and operate on the
'Heat & Mix' cycle.
Don't wash any part in the
Regularly dismantle the tap and
clean the parts thoroughly.
Remove the base/paddle assembly
from the goblet.
Never immerse in water or allow the
underside to get wet.
Wipe the upper surface and paddle
with a damp soapy cloth, then wipe
with a clean cloth and dry
thoroughly. Use the brush provided
to remove stubborn residue. Don't
use harsh abrasives.
Wipe with a damp cloth, then dry.
Wash by hand, rinse with clean
water then dry.
cleaning the tap
Remove the tap assembly from the
goblet, then soak the tap in hot
soapy water with the valve open
Wash thoroughly then rinse and dry.
Wash and dry the goblet then refit
the tap ensuring that the seals are
correctly positioned on the goblet
dismantling the tap
1 Unscrew the dispensing tap lever
2 Wash the components, then dry
3 Re-assemble the tap.
service and customer
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
If you need help with:
using your Frothie Deluxe
servicing or repairs
Contact the shop where you bought
your Frothie Deluxe.