Temperature Display; Listening To The Radio - Jensen JCR-265 User Manual

Am/fm projection clock radio
Table of Contents

Advertisement

5. Replace the top half of the ball and twist it clockwise to tighten.
6. To turn the projection off, set the Projection ON / OFF Switch (#24)
to "OFF".
Note:
Project the time image on the ceiling or wall of a darkened room.
The maximum projection distance is 3 to 9 feet.
TURNING THE NIGHT LIGHT ON/OFF
Set the NIGHT LIGHT ON/OFF Switch (#25) to "ON" to turn the Night
Light on or "OFF" to turn the Night Light off.

TEMPERATURE DISPLAY

Press the C/F button to display the temperature in ºC/ºF.
1. Set the BAND SWITCH (#15) to AM or FM as desired.
2. Press the
Button (#9) once to turn the unit on.
3. Rotate the TUNING CONTROL (#16) until you reach your desired
station and adjust the VOLUME Control until you reach a
comfortable listening level.
4. To turn the radio off, press the
TIPS FOR BEST RECEPTION
AM – The AM bar antenna is built inside the cabinet. If AM reception is
weak, change the position of cabinet until the internal antenna
picks up the strongest signal,
FM – During FM reception always keep the FM Wire Antenna
unwrapped and fully extended. If FM reception is weak, try
varying the position and direction of the FM Wire Antenna until
you fi nd the strongest signal.

LISTENING TO THE RADIO

Button (#9) again.
10

Advertisement

Table of Contents
loading

Table of Contents