System Requirements; Cconnecting To The Pc - Panasonic Panaboard KX-BP800 Operating Instructions Manual

Before Using the Interactive Function

System requirements

Computer:
CPU:
Port:
Operating System:
Memory:
Hard Disk Space:
Connecting to the PC
1
Connect one end of the proprietary interactive
cable supplied to the interactive connector
under the tray and the other end to the
computer's communication (COM) port.
Note
CBe sure to turn off the electronic print board
and PC before you connect or take off the
interactive cable.
2 After connecting the interactive cable, securely
tighten the screws on the connector.
26
®
IBM PC/AT or compatible machine with CD-ROM drive
®
Pentium 150MHz or higher processor
9-pin communication (COM) port
® ®
Windows 95, Windows
®
Windows NT 4.0 or Windows
32MB or higher
At least 10MB free space
®
98, Windows Millennium Edition,
®
2000
Interactive Cable
Note
This cable is a proprietary interactive cable for
connecting the electronic print board with
a PC.
Please do not use it with any other products.
Interactive Board
Tray
Interactive
Connector
To the PC
(communication port)