Panasonic Panaboard KX-BP800 Operating Instructions Manual page 22

Paper Jams
5
Install the film cassette.
CInsert the film cassette into the printer so that
the blue gear on the cassette aligns with the
blue label on the printer and then insert the
gear shafts on both sides of the cassette into
the grooves inside the printer.
6
Close the printer door.
CSecurely close the printer door with both hands
until a click is heard.
CThe"
indicator will go out.
C C If the flashing "
This may indicate that the paper feeder is not functioning properly.
Reload the copy paper by following the steps given below.
1 Turn the power off and on.
2
Open the paper cover and remove all copy
paper remaining inside the unit's paper cover.
CNote that the copy paper will slightly resist
being removed, but may be pulled out without
problems.
22
" flashing on the multi-copy/error
" does not go out after the foregoing procedure has been performed;
Blue Label
Grooves
Paper Cover
Grooves
Printer Door