Panasonic Panaboard KX-BP800 Operating Instructions Manual page 66

Daily Care and Maintenance
Clean the Printer Head
2 Dampen the tip of a cotton swab in ethyl
alcohol and gently wipe the printer head.
Note
CNever touch the printer head or the surrounding
area with your hands as this may disable
copying.
Clean the Platen Roller and the Feed Roller
3 Remove the film cassette with both hands and
carefully wipe any dirt or stains off the platen
roller and feed roller.
CFor details on removing the film cassette, see
page 20.
CDampen a soft cloth with neutral kitchen
cleaner diluted in water, wring the cloth
thoroughly, and wipe the entire surface of the
rollers while rotating them. If this does not
remove all dirt, wipe with a cloth dampened
with ethyl alcohol.
4 Attach the film cassette in its original position
and close the printer door.
CFor details on attaching the film cassette, see
page 14.
CClose the printer door firmly until a click is
heard.
Note
CIf "
indicator when the power is turned on, this
indicates that the film cassette has not been
installed properly or that there is slack in the
thermal transfer film. Check the condition of the
film cassette and for slack in the thermal
transfer film.
66
" is displayed on the multi-copy/error
Cotton Swab
Printer Head
(Gold)
Platen
Roller
Feed Roller
Printer Door
Printer Door