Error Display Messages - Panasonic CQ-VD7500U Operating Instructions Manual

Troubleshooting
E
N
G
L
I
S

Error Display Messages

H
CD/MP3/DVD/Video CD/CD Changer/SD-Card
68
Display
Disc is dirty, or is upside down.
- E1 -
aCheck disc.
Disc has scratches.
- E2 -
aCheck disc.
No operation by some cause.
aPress [u]. If failure persists, press the reset switch. (Press the reset
- E3 - switch in the CD changer). If normal operation is not restored, call the
store where you purchased the unit or the nearest Panasonic
Servicenter.
The type of the file that is selected is not supported.
- E4 -
aCheck disc.
No disc is in the player.
NO DISC
aInsert disc into the disc slot.
No magazine is in the changer.
NO MAGAZINE
aLoad the changer with CD-loaded magazine.
An attempt was made to play a disc with a region number other than "1" or
REGION ERROR "ALL".
aPress [u] and check the disc.
No card is inserted into the card slot, the card is not inserted until it clicks,
NO CARD or the card is defective.
aMake sure of card insertion.
The unit cannot recognize the play file, or there is no file on the SD card.
NO FILE aEnsure that the file name is proper and MP3/AAC files are recorded
with SD-Jukebox.
You are trying to play incompatible or corrupted data. These data cannot be
X
played.
aCheck the SD-Card.
The card cannot be played.
CHECK CARD
aCheck the SD-Card.
Notes:
¡ There may be cases when the disc numbers affected by an error are displayed before E1 and E2.
¡ Displays and the steps to be taken for errors vary in part from changer to changer. For details, refer to the Operating
Instructions for the changer used.
84
CQ-VD7700U/VD7500U
(continued)
Possible cause Possible solution
a
If the Unit Begins to Malfunction...
Reset switch
Insert a hard, slender stick into the hole and push the switch.
Important
Push the switch only when the unit fails to operate with any buttons. (Stored settings and adjustments are not cleared.)
If the unit fails to return to normal condition, call the nearest Panasonic Servicenter and ask for repairs.
Hide-away Unit
Reset switch
Note: If the ID-CODE has been already set, you will be asked to enter the ID-CODE right after the unit is restarted.
E
N
G
L
I
S
H
69
85
CQ-VD7700U/VD7500U