Tv Tuner/Vtr (External Devices) - Panasonic CQ-VD7500U Operating Instructions Manual

TV Tuner/VTR (External Devices)

E
N
G
L
I
S When not in operation mode, Touch the center of touch panel [Area A] to show operation display.
H
20
It is necessary to install the supplied antenna to receive TV broadcasts. Refer to the description on mounting the TV
antenna. (a Installation Instructions)
Mode selection
Operation off
Preset channel
calling
Auto preset memory
IN-DASH 7" WIDESCREEN COLOR LCD MONITOR TV / DVD / SD RECEIVER
Channel selection OPEN
VOLUME
MUTE NAVI DISP
NAVIGATION
[MODE]
NAVIGATION
MODE
PWR NAVI MODE MENU
STOP PAUSE PLAY CHAPTER
[OSD]
OSD OSD
[ ] ] [ [ ]
TOP MENU RETURN
(CHANNEL)
RET
DVD / SD MENU RANDOM REPEAT SCROLL
[}] [{]
RAND REP PAGE
ST/ MONO SUBTITLE TRACK
AUDIO ANGLE SUB GRP
TITLE / CHAPTER
CH1 CH2
1 1 2 2 3 3 DISP
[0] to [9]
SCAN
4 5 6
(Direct channel 4 5 6
VOL VOL
selection)
7 8 9
7 8 9
ASPECT
A 0 0
SPACE MUTE
P-MODE
CAR AV
36
CQ-VD7700U/VD7500U
(a
TV Tuner
Current channel number
TILT OPEN / CLOSE
Sub-LCD
OPEN / CLOSE
TILT
(a page 76)
CQ-VD7700U
CQ-VD7700U
TRACK/
CHANNEL
ENTER ENTER
DISC
SD CARD
MODE MODE ASP P·MODE
POWER ASPECT
[MODE] [ ] ] [ [ ] (CHANNEL)
[}] [{]
1
TV Mode
Remote
Press [MODE] to change to TV mode.
Panel
Touch .
2
Channel Setting
[[] (CHANNEL): up
[]] (CHANNEL): down
Press and hold [[] (CHANNEL) or
[]] (CHANNEL) for more than 0.5 seconds.
Seeking will start.
Direct Channel Selection
Remote
Enter a channel number by pressing [0] to [9].
Example: Channel Number 17
Press [1] and [7].
Panel
Not available.
page 24) Note: To go back to regular mode, press [OSD] (OSD OFF) or touch [OPERATION OFF] .
Preset Channels
This function can search for channels automatically. Up to 18 channels can be stored.
Auto Preset Memory
Remote
Press and hold [}] or [{] for more than 2 seconds.
[}]: the search starts from ch. 2 and proceeds successively.
[{]: the search starts from ch. 69 in reverse succession.
Panel
Touch and hold
¡A stored channel can be renewed every time you store another channel.
¡The unit may receive a channel that has poor-quality images depending on broadcasting conditions.
¡The search returns to the start position if there is no receivable channel.
Preset Channel Calling
Remote
Press [}] or [{] to select the channel.
Panel
Touch a preset channel number on the touch panel. (Example: channel number 17.
You can view the images and listen to the sounds from the connected external devices in the VTR1 mode and VTR2 mode
respectively.
VTR1/VTR2 Mode
Remote
Press [MODE] to change to VTR1 or VTR2 mode.
Panel
Touch
Notes:
¡You can set up the system so that the VTR mode is not select-
ed (VTR skip).
(VTR set to NAVI INPUT is not skipped even if VTR skip is set
to on.)
¡VTR1 and VTR2 terminals are not used for the Panasonic car
navigation system (available in future). Refer to "Installation
Instructions" and "NAVI SETUP" for setting.
for more than 2 seconds. Search starts from ch.2 successively.
VTR
or .
(a page 70)
(a page 68)
Touch .)
Example:
VTR1 : Camcorder
VTR2 : VCR
VTR1-IN VTR2-IN
CQ-VD7700U
Hide-away Unit
For details (a Installation Instructions)
CQ-VD7700U/VD7500U
E
N
G
L
I
S
H
21
37