Menu : Input/Output Setting - Panasonic CQ-VD7500U Operating Instructions Manual

MENU: DVD Settings
E
N
G
L
I
S
H
Menu
52
DISPLAY
plays a video in wide screen
(Display Aspect and DVD Software
(16:9).
Mode)
NARROW
DVD ASPECT plays a video in 4:3 screen.
(Display aspect setting)
PAN & SCAN
LETTER BOX
plays wide-screen video in Pan
(DVD software mode)
& Scan mode (in which the left
and right edges of the screen are
cut off).
Note: Screen aspect of the display
LETTER BOX
unit is changed according to the aspect
plays wide-screen video in let-
ratio setting (a page 71) and DVD
terbox mode (in which black
software's aspect.
bands appear at the top and bot-
tom of the screen).
Notes:
¡Set the software setting
according to the symbol used
on jacket.
¡DVD software mode setting is
ignored if "PAN & SCAN" or
"LETTER BOX" is already set
in the software.
MENU: Input/output Settings
Menu
RGB
NAVI SETUP
connected to the RGB input
(Navigation set up)
cord, or a car navigation system
NAVI INPUT
not connected
VTR1
(Navigation input)
connected to VTR1-IN
Selection of the terminal that connects to
VTR2
the car navigation system allows you to
connected to VTR2-IN
switch to images and sounds of the car
navigation system by pressing [NAVI]
(NAVIGATION).
68
CQ-VD7700U/VD7500U
(continued)
Setting Value Operations
WIDE
:
Panel
WIDE NARROW
or
:
Remote
[ } ] or [ { ] []] or [[]
a
default: WIDE
a [ENTER]
:
Panel
PAN & SCAN LETTER BOX
or
Remote
:
[ } ] or [ { ] a []] or [[]
a [ENTER]
(a page 29)
default: PAN & SCAN
Setting Value Operations
Panel
:
RGB VTR1
Remote
: [ } ] or [ { ] []] or [[]
a
a [ENTER]
:
Note: Make sure to select "RGB"
when no car navigation system is con-
nected.
default: RGB
MENU: Input/output Settings
: Previous menu
: Exit
NAVI SETUP
(continued)
NAVI SP
(Navigation input)
NAVI MUTE
(Navigation mute level)
Select the mute level of this unit during
voice guidance from the Panasonic car
navigation system (available in future).
Preparation: Connect the navi mute
lead.
NAVI VOLUME
(Navigation volume)
Volume adjustment of the car navigation
system is executed.
CAMERA SETUP
(Rear View Camera)
CAMERA
SCALE
: Previous menu
: Exit
(Rear view camera scale display)
Images through the rear view camera
can be shown in scale display mode.
VTR2
SCALE ADJUST
(Scale adjustment)
Menu Setting Value
BOTH : L/R speaker
Lch
: L only
Rch : R only
default: BOTH
OFF : unchanged
:
LEVEL1
decrease 10 dB (CQ-VD7700U)
decrease 10 step (CQ-VD7500U)
LEVEL2 :
decrease 20 dB (CQ-VD7700U)
decrease 15 step (CQ-VD7500U)
LEVEL3 : no sound
default: LEVEL1
Adjustment range: 0 to 40
default: 30
0 : the sound that a car navigation
system generates does not come out.
: camera off
OFF
ON : camera on
default: OFF
OFF : scale display off
ON : scale display on
default: OFF
] [
or : width
} {
or : angle
E
(continued)
N
G
L
I
: Previous menu S
H
: Exit
Operations
53
Panel
BOTH Lch Rch
Remote
[ } ] or [ { ]
a []] or [[] a [ENTER]
Panel
OFF LEVEL1 LEVEL2 LEVEL3
Remote
[ } ] or [ { ]
a []] or [[]
a [ENTER]
Note: You can set the navigation mute level
when "RGB" is selected as navigation input.
Panel
] [
Remote
[ } ] or [ { ] []] or [[]
a
Panel
OFF ON
Remote
[]] or [[] a [ENTER]
Panel
OFF ON
Remote
[]] or [[]
a [ENTER]
Panel
] [
or : Wide
} {
or : Angle
Remote
[[] or []] : Wide
a [ENTER]
[}] or [{] : Angle a [ENTER]
69
CQ-VD7700U/VD7500U