Panasonic CQ-VD7500U Operating Instructions Manual page 26

MENU: User Settings
E
N
G
L
I
S
H
Menu
40
CALENDAR
(Calendar Display)
Note: The calendar is not editable.
(e.g. Holidays cannot be marked.)
TOUCH PANEL
This function is used only when there are some differences between the
touching position and the symbol position displayed on the monitor.
(Panel touch position adjustment)
This function is not used ordinarily.
Position difference between the touch-
q Touch the four corners of the touch panel counterclockwise.
ing position and the displaying symbol
w Touch
position may appear in the following
situations:
1. The display position adjustment is
executed.
2. The system is initialized.
3. The power is turned off soon after
the touch panel is adjusted.
For the cases above, readjust the
touch panel position.
Note: This function can be performed
on the touch panel.
56
CQ-VD7700U/VD7500U
(continued)
Setting Value Operations
MONTH Panel
] [
MONTH : or
default: Same as Clock
{ }
YEAR
YEAR : or
default: Same as Clock Remote
MONTH : []] or [[]
YEAR :[ { ] or [ } ]
This function executes no setting, only
viewing.
END AGAIN
to finish this setup. Touch
Touch forth Touch third
Touch second
Touch first
: Previous menu
: Exit
ID-CODE
(ID Code Setting)
Prior to operating this unit, it is advis-
able to assign a 4-digit ID code for
security.
(Make sure to use four digits for ID
code.)
Once the ID code has been set, the unit
cannot be operated if the main power
supply is disconnected then re-con-
nected. It is electronically locked so
that a thief can not use the stolen unit
unless that person knows the code you
have set.
The ID code operation must be per-
formed only by the person to whom
the unit belongs.
Generally, it is not necessary to enter
the ID code each time when using the
unit if it has never been disconnected
from the main power supply (car bat-
tery).
to retry.
Note: The ID code setting cannot be
eliminated even by the memory clear
function.
MEMORY CLEAR
All current memories are returned to
default settings.
Note: In the SD mode, SD MENU set-
tings are not returned to the default
setting even when YES is selected as
this setting.
Caution: Be aware that this setting
restores the unit to default settings, so
that all the memories and settings that
you have set will be eliminated.
Menu Setting Value
0 9
to
4 digits numeric code
default: none
Caution: Record your regis-
tered ID code and keep it in a
secure location. If you forget it,
you will be unable to use the
unit. In case you forget the ID
code, please consult your near-
est Panasonic Servicenter.
Note: The inputted code is not
displayed for your security.
NO :
no memory clear. The display
returns to the previous one.
:
YES
default settings
default: NO
E
N
G
L
I
: Previous menu S
H
: Exit
Operations
41
0 9
Panel
to
Remote
[0] to [9]
How to set your ID code (for the first time)
q Enter an 4 digit ID code.
w Enter the same 4 digit ID code again.
How to change your ID code
q Enter the preset (old) 4 digit ID code.
If the wrong ID code is entered, a new
ID code cannot be registered.
w Enter a new 4 digit ID code.
e Enter the new 4 digit ID code again.
How to cancel the known ID code
Note: Should your unit ever require service,
cancel your ID code before sending for repair.
q Enter the preset (old) 4 digit ID code.
If the wrong ID code is entered, it is
not possible to cancel the ID code
function.
w Press and hold [ENTER] until
"Complete!" is displayed. The ID code
cancelling procedure is completed.
The unit now works without an ID
code.
Note: Refer to ID Code Input regarding
how to enter the ID code. (a page 6)
Panel
YES OK
: Memory clearance
CANCEL : No Memory clearance
Remote
[[] a [ENTER] [[] a [ENTER]:
Memory clearance
[]] a [ENTER]: a
No Memory clearance
57
CQ-VD7700U/VD7500U