Table of Contents
Advertisement
Attention!
!
As a basic rule, always check that the charge level is approximately as expected after the
charger has indicated that the battery is fully charged. This is a simple method of detecting a
problem reliably and in good time should the charging process be terminated incorrectly for
any reason. The likelihood of premature termination is subject to various factors but is at its
highest with deep-discharged batteries, small numbers of cells and particular types of battery.
Attention!
!
Carry out a series of test charges (especially with small numbers of cells) to check that the
automatic termination function is working correctly. If the voltage peak is too weak, the charger
may fail to detect that the battery is fully charged. Fire and explosion hazard!
Attention!
!
Do not connect several chargers to one power strip – danger of overloading the socket –
fire hazard!
Attention!
!
Are all the connections functioning properly? Are there any loose connections? Please
be aware that charging batteries using the quick-charge process can be dangerous. An
interruption caused by a loose connection, no matter how brief, will inevitably lead to
malfunctions, may cause the charging process to restart and may drastically overcharge
the connected battery. Fire and explosion hazard!
Attention!
!
Charging the transmitter: even a brief interruption to the charging process can cause the
charging voltage in the charger to rise to an overvoltage that will lead to the immediate
destruction of the transmitter. Fire hazard!
Information on handling batteries
Attention!
!
Always carry out a series of monitored test charges on new batteries to check whether
the termination function is working correctly for the batteries you are using.
Fire and explosion hazard!
Attention!
!
Overcharging and deep-discharge processes cause irreparable damage to the cells,
permanently impair the performance of the battery and reduce its capacity.
Attention!
!
Never store batteries for extended periods when they are uncharged, empty or partially charged.
Charge the batteries to their specified storage capacity before placing them in storage and check
their charge level from time to time.
Attention!
!
When buying batteries, make sure they are of good quality. Start by charging new batteries
at low rates, and work up gradually towards higher currents.
Attention!
!
Only charge batteries shortly before use, as they are then able to deliver their best
performance.
INNOVATION & TECHNOLOGY
7
Advertisement
Table of Contents
