Makita HS6100 Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Angular Guide
DISASSEMBLING
Angular guide can be disassembled as described in Fig. 6.
Fig. 6
1. Loosen M6x20 Hex bolt
with Lever 45, then remove
E-8 Bow stop ring.
E-8 Bow stop ring
M6x20 Hex bolt
4. Hold M5-8 Hex lock nut with Wrench 8,
then unscrew M5 Truss head screw
O ring 9 and Stopper can now be removed.
O Ring 9
M5 Truss
head screw
Stopper
Angular guide
ASSEMBLING
Assemble Angular guide by taking the reverse step of Disassembling. (Fig. 6)
Note:
1. E-8 Bow stop ring must be mounted as shown on the left in Fig. 2A.
2. Adjust Lever 45 as shown on the right in Fig. 2A.
2. Remove M6x20 Hex bolt
by using Lever 45 as a tool,
then remove Flat washer 6.
Lever 45
Flat washer 6
Lever 45
M6x20 Hex bolt
M5-8
Hex lock nut
3. Loosen M6x8 Hex socket head set crew,
then remove Shoulder pin 6-7 that
functions as a hinge.
Shoulder pin 6-7
5. Disassemble Angular guide.
Angular guide
P 7/16
M6x8 Hex socket
set screw