Makita HS6100 Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
DISASSEMBLING
Set the cutting depth of the machine to maximum, and remove saw blade.
Then remove both Rear angular guide section and Angular guide section from Base. Base can now be replaced. (Fig. 2)
Fig. 2
Rear Angular Guide Section
1. Unscrew M6 Thumb nut, then remove Flat washer 6
and M6x20 Flat head square neck bolt.
M6 Thumb nut
Flat washer 6
M6x20 Flat head
square neck bolt
Angular Guide Section
3. Loosen M6x20 Hex bolt using
Lever 45, then remove E-8 Bow
stop ring with a slotted screwdriver.
E-8 Bow stop ring
M6x20 Hex bolt
6. Base can now be separated from the machine.
Base
(on the rear of the machine)
(on the front of the machine)
4. Remove M6x20 Hex bolt
by using Lever 45 as a tool,
then remove Flat washer 6.
Lever 45
Flat washer 6
Lever 45
M6x20 Hex bolt
2. Loosen M6x8 Hex socket set crew with Hex wrench,
remove Shoulder pin 6-7 that functions as a hinge.
M6x8 Hex socket
set screw
Shoulder pin 6-7
5. Loosen M6x8 Hex socket set screw,
then remove Shoulder pin 6-7 that
functions as a hinge.
Shoulder pin 6-7
7. Base can be replaced after removing Top guide,
Lock levers, and four M6x8 Hex socket set screws.
M5x8 Pan hd. screw
Lock lever
M6x8 Hex socket
set screw
(4 pcs.)
P 3/16
M6x8 Hex socket
set screw
Top guide
Lock lever