Makita HS6100 Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Depth Guide
DISASSEMBLING
Disassemble Depth guide as described in Fig. 4.
Fig. 4
1. Set the cutting depth of the machine to minimum.
Remove Lock plate from Lever 70 by unscrewing
M4x8 Pan head screw.
M4x8
Pan head screw
3. Fix M4-7 Hex lock nut with Wrench 7, then remove
M4x20 Hex bolt with 1R288.
M4x20 Hex bolt
5. M6x18 Hex bolt can now be removed by loosening
M5x8 Hex socket set screw a little bit.
M6x18 Hex bolt
M5x8 Hex socket
set screw
Lock plate
M4-7 Hex
lock nut
2. From M6x18 Hex bolt, remove Lever 70, M6 Hex nut,
Flat washer 6 and Sleeve 6.
Lever 70
M6x18 Hex bolt
4. Depth guide and Flat washer 6 on Blade case side
can now be removed.
M6x18 Hex bolt
Depth guide
Flat washer 6
P 5/16
M6 Hex nut
Flat washer 6
Sleeve 6