Remote Control Unit
This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)
Aim the remote control at the remote sensor and operate it.
 to 
selects a preset station (1 to 6),
presets the current station (Hold it down for more
than 2 seconds.),
inputs the number in direct selection.
executes the direct selection.
[RANDOM] [SCAN] [REPEAT]
toggles on/off each play mode.
down/up the frequency (Hold it down for more
than 0.5 seconds and release it for seek tuning.
skip to the previous/next folder in player mode.
skip to the previous/next track/file in player mode.
Hold it down for fast reverse/fast forward.
A track (CD mode), file, folder (MP3 mode) can be directly
Example: Track number 5
Press [#] (NUMBER).
Press [BAND] (SET).
To suspend direct selection, press [DISP].
For folder selection, enter a number after pressing [#]
Functions only on Main unit
The following functions are not available on remote control
selects a band in the tuner source,
toggles pause/play in player source,
executes the APM in tuner source (Hold it down for more than 2 seconds).
selects a source.
toggles power on/off.
q Remove the battery holder with the
remote control unit placed on a flat
q Stick your thumbnail into the
groove, and push the holder in
the direction of the arrow at the
w Pull it out in the direction of the
arrow using a tough pointed object.
w Put a battery in the case with (+)
side facing up.
e Put the case back.
¡Keep batteries away from children to avoid the risk of
accidents. If an infant ingests a battery, please seek
immediate medical attention.
¡ Remove and dispose of an old battery immediately.
¡ Do not disassemble, heat or short a battery. Do not
throw a battery into a fire or water.
¡ Follow local regulations when disposing of a battery.
¡ Improper use of batteries may cause overheating, an
explosion or ignition, resulting in injury or a fire.
Battery Type: Panasonic lithium battery (CR2025) (Included
Battery Life: Approximately 6 months under normal use (at
[MENU] (SEL: Select)
selects the items in the audio menu.
adjusts the volume,
and selects the value in the audio menu, etc.
toggles mute on/off.
switches the information on display,
and exits the audio menu.
Tough pointed object
in the remote control)