Panasonic CQ-VX1300W Operating Instructions Manual

E
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this
N
product will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechani-
G
cal engineering, manufactured with carefully selected components and assembled by people who take
L
pride in their work. Once you discover the quality, reliability, and value we have built into this product, you
I
S
too will be proud to be a member of our family.
H
1
❏ Use This Product Safely
Volume level
Keep the volume level low enough to be aware of road
and traffic conditions.
When Washing Your Car
Do not expose the product, including the speakers, CDs
and tapes to water or excessive moisture. This could
cause electrical shorts, fire, or other damage.
Car Ventilation
Parking in direct sunlight can produce very high tempera-
tures inside your car. Give the interior a chance to cool
down before switching the unit on.
Use the Proper Power Supply
This product is designed to operate with a 12 V DC, nega-
tive ground battery system.
14
CQ-VX1300W
Disc Mechanism
Do not insert coins or any small objects. Keep screw-
drivers and other metallic objects away from the disc
mechanism and disc.
Tape Mechanism
Keep magnets, screwdrivers or other metallic objects
away from the tape mechanism and tape head.
For Installation
The product should be installed in a horizontal position
with the front end up at a convenient angle, but not more
than 30˚.
Note: The preset memory is cleared to return to the orig-
inal factory setting when the power connector or battery
is disconnected.

Before Use

Accessories
¡ Operating Instructions .................................................................................... 1
¡ Supplied hardware .............................................................. 1 set
¡ Remote Control Unit........................................................................................ 1
¡ Lithium Battery (CR2025) .............................................................................. 1

Remote Control Unit

Battery Installation q Remove the battery holder.
Pull the holder out at position B while pushing position A as indicated.
w Install the battery on the battery holder.
Place the battery in the holder with its (+) side upwards as shown.
e Insert the battery holder.
Push in the battery holder back into its original position.
Battery Notes Remove and dispose of an old battery immediately.
Battery Information:
¡ Battery Type: Panasonic lithium battery (CR2025) (Included)
¡ Battery Life: Approximately 6 months under normal use (at room tem-
perature)
Caution: Improper use of batteries may cause overheating, an
explosion or ignition, resulting in injury or a fire.
¡ Do not disassemble or short the battery. Do not throw a battery into a
fire.
¡ Keep batteries away from children to avoid the risk of accidents.
¡ Follow local regulations when disposing of batteries.
(a page 38)
(Back side)
Lithium battery
w
Position B
e
q
Battery holder
Position A
CQ-VX1300W
E
N
G
L
I
S
H
2
15