Table of Contents
Advertisement
1. Headlight beam switch "LIGHTS"
2. High beam "HI"
3. Low beam "LO"
ESU12711
Grip warmer/rear shock ab-
sorber compression damping
and thumb warmer adjustment
switches
These switches are used to adjust the grip
warmer, rear shock absorber compression
damping and thumb warmer levels.
See "Fuel meter, grip warmer level indicator,
rear shock absorber compression damping
level indicator, and thumb warmer level indi-
cator" on page 12 for detailed information.
1. Grip warmer/rear shock absorber compres-
sion damping adjustment switch
Control functions
1. Thumb warmer adjustment switch
ESU10691
Auxiliary DC jack
The auxiliary DC jack is located in the front
panel and can be used for accessories.
TIP
The auxiliary DC jack cannot be used if the
engine is not running.
To use the auxiliary DC jack
1.
Start the engine.
2.
Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
1. Auxiliary DC jack cap
2. Auxiliary DC jack
3.
After using the auxiliary DC jack, be sure
to remove the accessory power plug from
the jack and to close the auxiliary DC jack
cap.
17
Hide quick links:
Advertisement
Table of Contents
