Yamaha Apex RX10GTY Owner's Manual page 31

Tightening torque:
Locknut:
25 Nm (2.5 m·kgf, 18 ft·lbf)
ESU11014
Adjusting the damping forces of the
rear shock absorber
Adjusting the compression damping force
The compression damping force can be ad-
justed by pressing the grip warmer/rear shock
absorber compression damping adjustment
switch. (See page 12 for adjustment proce-
dures.)
1. Grip warmer/rear shock absorber compres-
sion damping adjustment switch
Adjusting the rebound damping force
The rebound damping force can be adjusted
by turning the adjusting dial.
To increase the rebound damping force, turn
the adjusting dial in direction (a). To decrease
the rebound damping force, turn the adjusting
dial in direction (b).
Control functions
1. Rebound damping force adjusting dial
Rebound damping setting:
Minimum (soft):
30 click(s) in direction (b)*
Standard:
20 click(s) in direction (b)*
Maximum (hard):
10 click(s) in direction (b)*
* With the adjusting dial fully turned in di-
rection (a)
ESU11053
Adjusting the control rod
The weight transfer can be adjusted by turn-
ing the adjuster on the control rod.
1. Check the control rod length using the
scale on the special wrench as shown.
1. Special wrench
2. Control rod length
3. Scale range
TIP
Use the special wrench in the owner's tool kit
to make this adjustment.
1
3
2
25