Adjusting The Shutter Speed - Panasonic AG-HPX172EN Operating Instructions Manual

Panasonic memory card camera-recorder operating instructions
Table of Contents

Advertisement

Adjusting the shutter speed

SHUTTER button
BARS
CH1 SELECT
INT(L)
INT(R)
INPUT1
INPUT2
INPUT2
COUNTER
RESET/TC SET
LCD
1
Press the SHUTTER button.
Each time you press the SHUTTER button, the
shutter speed switches between normal (OFF)
and the speed you selected with the SPEED
SELECT button.

After you have pressed the SHUTTER
button, press SPEED SELECT to select the
shutter speed.
The shutter speed changes as follows each
time you press SPEED SELECT + (The
order is reversed for the SHUTTER SELECT
- button.)
Remember that the faster the shutter speed,
the lower the sensitivity.
If iris is set to auto, then it will open wider
with higher shutter speeds and thereby
reduce focal depth.
It will take longer to focus when the
shutter speed has been reduced so it is
recommended that the unit be secured to a
tripod, etc. for use.
With the 1080i/50i, 720P/50P and 576i/50i formats
Standard (Off) 1/50
With the 1080i/25P, 720P/25P, 576i/25P and 720P/25PN formats
Standard (Off) 1/50
* Bold and underlines indicate formats that can be selected only when VIDEO COM is selected under
OPERATION TYPE, and OFF is selected under DRS in the SCENE FILE screen of the setup menus.
8
SPEED SELECT button
SHUTTER
SPEES SELECT
CH2 SELECT
INPUT1
INPUT2
ON
ON
OFF
OFF
MIC POWER+48V
AUDIO
REC
ZEBRA
OIS
EVF DTL
WFM
SYNCRO SCAN "1/12 "1/25 "1/60 "1/120
The current shutter speed appears on the
viewfinder and LCD screens unless you have
selected OFF in OTHER DISPLAY in the DISPLAY
SETUP screen of the setup menus.
It is not displayed if you have set the shutter speed
to normal (OFF).
With artificial lighting and especially fluorescent
lights and mercury-vapor lamps, the luminance
changes in synchronization with the power
line frequency. When this frequency is 50 Hz,
mutual interference will occur between the
camerarecorder's vertical sync frequency (approx.
60 Hz) and the lighting frequency (50 Hz). This
means that the white balance may change
periodically.
Before shooting in areas with artificial lighting or
adjusting the white balance, set the shutter speed
as follows.
Progressive
mode
OFF (50i)
25P/25PN
The gain is fixed at 0 dB with a shutter speed of
1/12.
                  
1/2000 "1/1000 "1/500 "1/250
SYNCRO SCAN "1/12 "1/25 "1/60
                
1/1000 "1/500 "1/250 "1/120
PUSH STILL
1/60.0
Shutter speed
50 Hz
1/60
OFF (1/50)
OFF (1/50)
60 Hz
1/60

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents