Panasonic AG-HPX172EN Operating Instructions Manual page 55

6
Press the MENU button four times to cancel
the menu mode.
To load a file
1) Perform steps 1 to 3, select READ in step 4
and push the Operation lever.
When reading is completed, READ OK
appears.
To title a file
1) Perform steps 1 to 4.
2) Push the Operation lever in the e or r
direction to select a character, then push it in
the q direction to move to the next character.
(The next character can now be selected.)
• You can input any of the following characters:
Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./
• You can erase all characters using the
RESET button on the camera or the remote
control.
BARS SHUTTER SPEES SELECT
CH1 SELECT CH2 SELECT INPUT1 INPUT2
INT(L) INT(R) ON ON
INPUT1 INPUT2
OFF OFF
INPUT2
MIC POWER+48V
AUDIO
REC
COUNTER RESET/TC SET ZEBRA OIS
LCD EVF DTL WFM
Camera or Remote control
3) When all characters have been entered, push
the Operation lever in the w direction at the left
end (or in q direction at the right end) of the
characters. Then press the Operation lever .
To reload a file from an SD memory card
1) Perform steps 1 and 2.
2) Push the Operation lever in the e or r
direction to move to TITLE RELOAD, display
YES and press it again.
The file reloads.
• If WRITE NG FORMAT ERROR appears,
format the SD memory card. (Page 28)
• If WRITE NG WRITE PROTECT appears,
release the protected status of the SD
memory card.
• If WRITE NG CANNOT ACCESS appears,
quit all other operations (such as playback)
before proceeding.
• If WRITE NG ERROR appears, the SD
memory card may be defective. Replace it.
START/
DATE/ PHOTO STOP
OSD TIME SHOT
COUNTER RESET TITLE
ZOOM
MULTI/
P-IN-P REC A.DUB
/REW PLAY FF/
55