Table of Contents
Advertisement
Adjusting the Viewfinder
Adjusting the Mounting Height of the Viewfinder
The mounting height of the viewfinder can be adjusted using the method described
below.
Adjust the height of the mounting unit as required.
O At the time of shipping, the mounting height is set for use with the AJ-HDC10A and
AJ-HDC20A models.
O Adjusting the height of the mounting unit
1.
Detach the two screws, the detach the
mounting unit.
2.
Replace the three screws in the positions indicated as A or B from the present
positions and change the position of the metal fitting.
Re-fix the metal fitting by fastening the screws together with the spring washer.
3.
Secure the mounting unit in place with the two
screws.
Metal fitting
E– 7
Mounting unit
Screws
Screws
Advertisement
Table of Contents
