Panasonic AG-HPX172EN Operating Instructions Manual page 110

Setup menu list (continued)
OTHER FUNCTIONS screen (continued)
Item
ACCESS LED
REC LAMP
BEEP SOUND
CLOCK SET
TIME ZONE
110
Display
mode
(Camera) Sets the access lamp to ON or OFF.
(MCR)
ON:
The lamp lights up and blinks as per the regular specifications.
OFF:
The lamp is OFF in all circumstances.
(Camera) Sets lighting of the tally lamp.
OFF:
The tally lamp does not light.
FRONT:
Front tally lamp (microphone side) lights.
REAR:
Rear tally lamp (viewfinder side) lights.
BOTH:
Both tally lamps light.
(Camera) Turns the beep sound ON or OFF.
ON, OFF
When ON is selected, the beep is sounded when the memory of the P2
card has been used up during recording.
When the beep is sounded, the audio signals from the output connector
are muted before the beep sound is output.
(Camera) Sets the camera-recorder's calendar.
(MCR)
(Camera) Adds to or deducts from GMT the time value of -12:00 to +13:00 in
(MCR) 30-minute steps. (As an exception, you can set +12:45.) Refer to the
table below.
0:00
Time
difference
00:00
– 01:00
– 02:00
– 03:00
– 04:00
– 05:00
– 06:00
– 07:00
– 08:00
– 09:00
– 10:00
– 11:00
– 12:00
+ 13:00
+ 12:00
+ 11:00
+ 10:00
+ 09:00
+ 08:00
+ 07:00
+ 06:00
+ 05:00
+ 04:00
+ 03:00
+ 02:00
+ 01:00
Description of settings
Time
Area
difference
Greenwich - 00:30
Azores Islands – 01:30
Mid-Atlantic – 02:30
Buenos Aires – 03:30
Halifax – 04:30
New York – 05:30
Chicago – 06:30
Denver – 07:30
Los Angeles – 08:30
Alaska – 09:30
Hawaii – 10:30
Midway Island – 11:30
Kwajalein + 11:30
+ 10:30
New Zealand + 09:30
Solomon Islands + 08:30
Guam + 07:30
Tokyo + 06:30
Beijing + 05:30
Bangkok + 04:30
Dacca + 03:30
Islamabad + 02:30
Abu Dhabi + 01:30
Moscow + 00:30
Eastern Europe + 12:45
Central Europe
___indicates the factory setting.
Area
Newfoundland Island
Marquesas Islands
Norfolk Island
Lord Howe Island
Darwin
Rangoon
Bombay
Kabul
Tehran
Chatham Islands