Panasonic AW-AD700BS Instructions Manual

Camera adaptor for aw-f575 series

Advertisement

Quick Links

Before attempting to connect or operate this product, please read
these instructions completely.
PREFACE
• The Camera Adaptor AW-AD700BS docks directly
to the Color Camera AW-F575 series, making it a
standard-alone camera for two-piece recording
system applications.
Connection via a VTR cable for several different
portable recorder is possible.
NOTE: Refer to the operating instructions of Color Camera AW-F575 series for details.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead sym-
bol, within an equilateral triangle, is
intended to alert the user to the pres-
ence of uninsulated "dangerous voltage"
within the product's enclosure that may
be of sufficient magnitude to constitute a
SA 1965
risk of electric shock to persons.
The exclamation point within an equilat-
eral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the appli-
ance.
SA 1966
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AW-AD700BS
for AW-F575 Series
• Video Power (VP) Multiplex Operation is available
using with the Power Separator WV-PS700.
• Possible to mount a lens having zoom, focus or
servo functions.
• Pan/Tilt Control function is provided.
Warning:
This equipment generates and uses radio frequency
energy and if not installed and used properly, i.e., in
strict accordance with the instruction manual, may
cause harmful interference to radio communications.
It has been tested and found to comply with the limits
for a Class A computing device pursuant to Subpart J of
Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when
operated in a commercial environment.
This digital apparatus does not exceed the Class A limits
for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian
Department of Communications.
The serial number of this product may be found on the
bottom of the unit.
You should note the serial number of this unit in the
space provided and retain this book as a permanent
record of your purchase to aid identification in the event
of theft.
Model No.
Serial No.
Camera Adaptor
For U.S.A
For CANADA

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic AW-AD700BS

  • Page 1 Camera Adaptor AW-AD700BS for AW-F575 Series Before attempting to connect or operate this product, please read these instructions completely. PREFACE • The Camera Adaptor AW-AD700BS docks directly • Video Power (VP) Multiplex Operation is available to the Color Camera AW-F575 series, making it a using with the Power Separator WV-PS700.
  • Page 2: Major Operating Controls And Their Functions

    MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS VTR MULTI Y/C/B R/G/B 60(dB) Y/PR/PB CABLE AUDIO EARPHONE RCU/VTR LEVEL OUT SEL TRIGGER SIGNAL !5 !3 1. Camera Handle 6. Intercom Jack (M6) (INCOM) This jack is used for communication between the 2. Camera Adaptor Holding Screw/knob camera operator and operators of Remote Control The camera adaptor can be removed from the Unit (RCU) and Special Effect Generator in the sys-...
  • Page 3 12. Cable Selection Switch (VTR MULTI/MPX) 18. VTR/RCU Connector (26-pin) (VTR/RCU) This switch is used to select either the multi-cable When using the camera together with a Panasonic VTR/RCU cable or the single coaxial multiplex portable color VTR, the specified VTR Cable should cable.
  • Page 4: Connector Information

    MII portable VTR (26-pin) 22. Recording/Tally Indicator (red) (REC TALLY) WV-CA26A26 (26p-26p cable) This indicator lights when the VTR is set to the • 26-pin Studio Cable (RCU Cable) recording mode (through the VTR Start/Stop WV-CA26U15 Button), and informs the person concerned of WV-CA26U30 scenes being recorded.
  • Page 5 • Control Voltage (each voltage is ±0.5V.) for the Lens Connector (19) lens. • EPin configuration Not used Not used Speed High Not used NEAR 4.0V 2.5V Not used 6.0V 7.5V +12V IN WIDE 4.0V 2.5V +5V IN TELE 6.0V 7.5V FOCUS CONT <Front View>...
  • Page 6: Installation

    INSTALLATION Installation of the Camera Adaptor 1. Mounting the Camera Adaptor 2. Removing the Camera Adaptor 1-1 Mount the Camera Adaptor with Camera Handle to 2-1 Loosen two Camera Adaptor Holding Screw/Knob the camera while engaging the 68-pin connector. (2) on the Camera Adaptor. Loosen two Camera Adaptor Holding Knobs.
  • Page 7: Specifications

    SPECIFICATIONS Camera Docked: Color camera AW-F575 series connected through 68-pin connector Gen-lock Input: NTSC composite (VBS) signal or black burst signal Video Output: 1.0 V[p-p] NTSC composite/75 (BNC) connector Y/C (S-VIDEO) Output: (S-VIDEO Connector) 0.714 V[p-p] Video Level Luminance (Y) composite/75 0.286 V[p-p] Burst Level Chrominance/75 VTR/RCU Output (26-pin connector) 1.0 V[p-p] NTSC Composite/75...
  • Page 8 Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 3F-5, Secaucus, NJ 07094 Regional Offices: EASTERN ZONE: 50 Meadowlands Parkway, Secaucus, NJ 07094 (201) 348-7620 CENTRAL ZONE: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5200...

Table of Contents