Parts Layout; Operation; Before Use - Black & Decker BD2200 Original Instructions Manual

5. Parts Layout

5. Parts Layout
1. Fuel gauge
2. Fuel cap
3. 230 V~ socket out lets.
4. 12Vd.c. connector out lets
5. Earth connection
6. Circuit breaker
7. Voltmeter
14. Carry handle
15. Spanner
16. DC connecting cord

6. Before Use.

6. Before Use.
6.1 Important: Electrical safety
- Electric supply cables and connected
equipment must be in perfect condition.
short as possible.
- Dispose of soiled maintenance material
and operating materials at the appropriate
collection point.
- Recycle packaging material, metal and
plastics.
6.3 Connecting to earth
earth in order to discharge static electricity.
To do this, connect one end of a cable to the
an earth rod).

7. Operation.

7. Operation.
7.1 Before starting the generator.
fuel before you can start the engine.
necessary.
- Make sure that the ignition cable is secured
to the spark plug.
generator.
may already been connected to the generator.
pulling the handle forcefully. If the engine
does not start, pull the handle again.
the engine has started.
Important!