Black & Decker bdv066 Instructions Manual

Black & Decker bdv066 Instructions Manual

400 w power inverter
Hide thumbs Also See for bdv066:


New Zealand


Table of Contents

Summary of Contents for Black & Decker bdv066

  • Page 1 Ireland Australia New Zealand...
  • Page 2: Intended Use

    Intended use switches and any other conditions that may affect its operation. Your Black & Decker 400 W power inverter is designed to Do not use the appliance if any part is damaged or convert direct current (dc) to alternating current (ac). It defective.
  • Page 3: Operating Instructions

    The power inverter output waveform The power inverter may be used whether or not the vehicle's engine is running. However, the power inverter may not The ac output waveform of the power inverter is known as a operate while the engine is starting because the battery "modified sine wave".
  • Page 4: Troubleshooting

    at least 15 minutes before restarting after a heat-related The appliance will shut down if the internal temperature shutdown. Unplug the appliance while cooling. gets too hot. SAFE - Do not use the appliance near flammable Connecting to a power source using the cables materials or in any locations that may accumulate Use the cables and connect the appliance directly to the flammable fumes or gases.
  • Page 5: Protecting The Environment

    Install the cap by turning clockwise onto the plug. EC declaration of conformity Protecting the environment BDV066 - TYPE 2 Separate collection. This product must not be Black & Decker declares that these products conform to: disposed of with normal household waste.
  • Page 6 To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual.
  • Page 8 L-11/08 90545213...

Table of Contents