Kenwood KDC-X7000DAB Instruction Manual page 17

BLUETOOTH®
MIC GAIN –10 — +10 (–4): The sensitivity of the microphone
increases as the number increased.
NR LEVEL –5 — +5 (0): Adjust the noise reduction level until the
least noise is being heard during a phone conversation.
ECHO CANCEL
–5 — +5 (0): Adjust the echo cancellation delay time until
the least echo is being heard during a phone conversation.
Make the settings for receiving a call
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3 2
Repeat step until the desired item is selected or
activated.
4
Press and hold to exit.
To return to the previous setting item, press
SETTINGS
AUTO ANSWER 1 — 30: The unit answers incoming call automatically in
the selected time (in seconds). ; OFF: Cancels.
BATT/SIGNAL* AUTO: Shows the strength of the battery and signal when
the unit detects a Bluetooth device and the Bluetooth
device is connected. ; OFF: Cancels. Clock time is shown.
* Functionality depends on the type of the phone used.
Default: XX
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call by
voice is also possible if your mobile phone has the feature.
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table), then press
the knob.
3
Repeat step
instructions stated on the selected item.
4
Press and hold
To return to the previous setting item, press
CALL HISTORY
.
Default: XX
PHONE BOOK
2
until the desired item is selected/activated or follow the
to exit.
(Applicable only if the phone supports PBAP)
1 Press the volume knob to select a name or a phone number.
• "INCOMING", "OUTGOING", or "MISSED" is shown on the lower part of the display
to indicate the previous call status.
• Press DISP to change the display category (NUMBER or NAME).
• "NO DATA" appears if there is no recorded call history.
2 Press the volume knob to call.
(Applicable only if the phone supports PBAP)
1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook
contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
• To select the desired first letter, turn the volume knob or press S / T, then
press the knob.
Select "1" to search with numbers and select "
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• The phonebook of the connected phone is automatically transferred to the unit when
pairing.
• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
• This unit can display only non-accent letters. (Accent letters such as "Ú" is showns as
"U".)
.
), press J / K.
*
* " to search with symbols.
ENGLISH
15