Kenwood KDC-X7000DAB Instruction Manual page 15

BLUETOOTH®
• This unit supports Secure Simple Pairing (SSP).
• Up to 10 devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain
registered in the unit even if you reset the unit. To delete the paired
device, 17, [DEVICE DELETE].
Once pairing is completed, Bluetooth connection is established
automatically. "BT1" and/or "BT2" on the display window lights up.
• A maximum of two Bluetooth phones and one Bluetooth audio device
can be connected at any time.
• Some Bluetooth devices may not automatically connect to the unit
after pairing. Connect the device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more
information.
Auto Pairing
When you connect iPhone/ iPod touch/ Android device to the USB input
terminal, pairing request (via Bluetooth) is automatically activated.
Press the volume knob to pair once you have confirmed the device
name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
– [AUTO PAIRING] is set to [ON]. ( 17)
– KENWOOD MUSIC PLAY application is installed on the Android device
( 10) and [BROWSE MODE] is selected ( 11).
Connect with a remote device by One-touch (NFC)
Near Field Communication (NFC) enables short-range wireless
communication between the unit and remote devices.
By holding an NFC-compatible remote device near to the N-Mark on the
unit (volume knob), the unit and remote device proceed to complete
pairing and established the BLUETOOTH connection automatically.
1
Activate the NFC function on the remote device.
Refer to the instruction manual of the remote device for more
information.
2
Hold the remote device near to the N-Mark on the unit (volume
knob).
The device vibrates when pairing is completed.
• To disconnect, hold the remote device near to the N-Mark on the unit
(volume knob) again.
• This unit only can recognize and connect to one NFC-compatible device
at a time.
13
ENGLISH