Related Manuals for Kenwood KDC-X7013U
Summary of Contents for Kenwood KDC-X7013U
- Page 1 CD-RECEIVER KDC-XBT8013U KDC-XBT8013UL KDC-X7013U KDC-X7013UL INSTRUCTION MANUAL © B64-4418-00/00 (MW/M3W)
-
Page 2: Table Of Contents
Date Format Selection AMP Control Demonstration mode setting Theft Deterrent Faceplate Audio Adjustments Audio Control Audio Setup KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Sound Setup Cabin selection Speaker setting DTA (Digital Time Alignment) setting X’Over setting Preset Equalizer curve select Manual Equalizer Control... -
Page 3: Before Use
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters that conform to GB2312 or ISO 8859-1 can be displayed. -
Page 4: Basic Operation
Subwoofer output: Control knob Switches between ON (“SUBWOOFER ON”) and OFF (“SUBWOOFER OFF”) each time pushing toward down for at least 2 seconds. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Auxiliary input Connect a portable audio device with mini-plug cable (3.5 ø). ⁄... -
Page 5: Hands-Free Phoning
Changes the frequency when pushing toward left or right. ⁄ • During reception of stereo stations the “ST” indicator is ON. Tuning mode select: [AUTO] For KDC-X7013U/ KDC-X7013UL: • Switches as follows each time this button is pressed. For KDC-XBT8013U/ KDC-XBT8013UL: Switches as •... -
Page 6: Function Control
Exit Function Control mode Press the [FNC] button for at least 1 second. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed. - Page 7 Source function item Function Setting “iPod BY HAND” “ON”/ “OFF”* “FILE SCAN” “ON”/ “OFF”* “FOLDER RDM” “ON”/ “OFF”* “ALL RANDOM” “ON”/ “OFF”* “FILE REPEAT” “ON”/ “OFF”* “FOLDER REP” “ON”/ “OFF”* “TRACK SCAN” “ON”/ “OFF”* “DISC RANDOM” “ON”/ “OFF”* “MAGAZINE RDM” “ON”/ “OFF”* “TRACK REPEAT”...
- Page 8 Select” [A] – [D]” “Graphic Select” “Graphic 1 –2” “Side Select” 3 types KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Entry Setting overview Specify the voice output speaker. Output a beep from the speaker when a call comes in. Display the firmware version and update the firmware.
- Page 9 Category Item Setting “Text Select” — “Status” Appear/ Disappear “Color “All” “Variable Select” Scan”*/ “Color 1” – “Display” “Color 10”/ “Right” “User” “Left” “SOUND” “Control” “EQ” — “Bass Boost” “OFF”*/ “STEP1”/ “2” “HIGHWAY- “OFF”/ “STEP1” SOUND” / “2”/ “3”* “Supreme+” “ON”*/ “OFF”...
-
Page 10: Display Settings
• When “TYPE [C]” is selected, the spectrum analyzer can be switched by the following <Function Control> (page 6) operation. > > : Select “SETUP” “Display Select” KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Text Display Selection Changes displayed information on each source following; In Tuner source Information Frequency Spectrum analyzer &... -
Page 11: Illumination Color Selection
Select the text Turn the Control knob. Exit Text display selection mode Press the [FNC] button. ⁄ • If the selected display item does not have any information, alternative information is displayed. • When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed. -
Page 12: Music Disc/Audio File Operation
Press the [ ] button. ⁄ • Music Search cannot be performed during Random play. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Function of iPod Music Search for iPod Search for the song (in iPod) you want to play. Enter Music Search mode Press the [ ] button. -
Page 13: All Random
Start the alphabet search Push the Control knob towards down. “A B C …” is displayed. • If you can not search for a song by an alphabetic character in the browse item selected now, the data on the screen does not change. Select the initial to be searched for Operation type Operation... -
Page 14: Direct Disc Search
Basic Operation of Disc Changer (Optional) Selecting CD changer source Press the [SRC] button. Select the “CD CHANGER” display. Music search Push the Control knob towards right or left. Disc Search Push the Control knob towards up or down. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL... -
Page 15: Tuner Operation
Tuner Operation Auto Memory Entry Putting stations with good reception in the memory automatically. Enter Auto Memory Entry mode Select “AUTO MEMORY”. For how to select Function Control items, refer to <Function Control> (page 6). Open Auto Memory Entry Turn the Control knob to select “YES”, and then press the Control knob. -
Page 16: Operation Of Hands-Free Phoning
Function of KDC-XBT8013U/ KDC-XBT8013UL KDC-X7013U/ KDC-X7013UL with KCA-BT200 (Optional Accessory) Operation of hands-free phoning Before Use • For details on the Bluetooth cell-phone with the hands-free function, see <About the Cell-Phone> (Page 41). • You need to register your cell-phone before using it with this unit. -
Page 17: Making A Call
Making a call Enter dialing method mode KDC-XBT8013U/ KDC-XBT8013UL: Press the [ ] button. KDC-X7013U/ KDC-X7013UL: Press the [ ] button for at least 1 second. Select a dialing method Press the Control knob. “DIAL” » “INITIAL” » “PHONE BOOK” » “OUT-CALL” »... -
Page 18: Calling A Number In The Phone Book
Function of KDC-XBT8013U/ KDC-XBT8013UL KDC-X7013U/ KDC-X7013UL with KCA-BT200 (Optional Accessory) Operation of hands-free phoning Calling a number in the Phone Book Enter dialing method mode KDC-XBT8013U/ KDC-XBT8013UL: Press the [ ] button. KDC-X7013U/ KDC-X7013UL: Press the [ ] button for at least 1 second. -
Page 19: Registering To The Preset Dial Number List
⁄ • If your voice cannot be recognized, a message is displayed. Pressing the Control knob allows you to retry voice input. (Page 48) • Both the name and category requires registration of a voice tag. (Page 34) • Audio sound is not output during voice recognize. Registering to the Preset Dial Number List Enter the phone number you wish to register... -
Page 20: Bluetooth Audio Operation
Perform the operation for starting or stopping playback. • Some audio players cannot be controlled remotely or reconnected after Bluetooth disconnection. Operate the main unit of the audio player to connect Bluetooth. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL... -
Page 21: Other Functions
Other Functions Activating Security Code ⁄ • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. Select Security code mode >... -
Page 22: Manual Clock Adjustment
Adjust each item Turn the Control knob or push it towards up or down. Exit Date adjustment mode Press the [FNC] button. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Date Format Selection Select Date format mode > Select “MENU” “Date Mode”. -
Page 23: Demonstration Mode Setting
Demonstration mode setting Turning the demonstration mode ON/OFF. Select Demonstration mode > Select “MENU” “DEMO Mode”. For how to select Function Control items, refer to <Function Control> (page 6). Set the Demonstration mode Press the Control knob for at least 2 seconds. Pressing this button for 2 seconds or longer toggles the setting between “ON”... -
Page 24: Audio Adjustments
Turn the [AUD] knob. Exit Audio Control mode Press any button. Press a button other than the [AUD] knob or [0] button. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Audio Setup You can set Sound system , such as follows; Adjustment Item Display... -
Page 25: Sound Setup
Sound Setup Cabin selection You can compensate the delay of the sound arrival time by selecting your environment from the following car types; Car type Not compensating. Compact car Full size car Station wagon Minivan Sport-utility vehicle Long Minivan Enter Cabin select mode >... -
Page 26: Dta (Digital Time Alignment) Setting
Adjust between 0 and 440 cm. Refer to “DTA” of <Menu Glossary> (Page 42) on how to set the compensation value. Exit DTA setting mode. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL X’Over setting Fine adjusting the following setting values corresponding to the X’Over values set in the section <Speaker Setting>... -
Page 27: Preset Equalizer Curve Select
Preset Equalizer curve select You can select following Equalizer curve; Equalizer curve Natural User* Rock Pops Easy Top 40 Jazz Game iPod (During iPod source only) * The Equalizer curve set in the section <Manual Equalizer Control> is recalled. Enter Preset Equalizer mode >... -
Page 28: Preset Position Selection
Select the seat you want to compensate Turn the Control knob. Exit Preset position setting mode Press the [FNC] button. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Manual position setting Making fine adjustment of the value specified at Preset position selection per speaker. -
Page 29: Audio Preset Memory
Audio Preset Memory Registering the value setup by Sound Control. Setup Sound Control Refer to the following operations to setup the Sound Control. - Cabin selection (Page 25) - Speaker Setting (Page 25) - DTA (Digital Time Alignment) setting (Page 26) - X’Over setting (Page 26) - Manual Equalizer Control (Page 27) - Preset position selection (Page 28) -
Page 30: Favorite Control
The FAVORITE registration should be performed again after editing the items in iPod. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Favorite Preset Recall Retrieving an item registered to Favorite. -
Page 31: Favorite Name Setting
Favorite Name Setting Giving a name to Preset Memory registered to Favorite. Enter Preset Recall mode Turn the Control knob. Retrieve the Preset Memory to change Turn the Control knob. Enter Favorite Name set mode Press the Control knob for at least 1 second. Select the “FAVORITE NAME SET”... -
Page 32: Bluetooth Setup
Function of KDC-XBT8013U/ KDC-XBT8013UL KDC-X7013U/ KDC-X7013UL with KCA-BT200 (Optional Accessory) Bluetooth Setup Registering Bluetooth device To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to five Bluetooth devices to this unit. -
Page 33: Downloading The Phone Book
Press the Control knob for at least 1 second. The current setting of PIN code is displayed. Input the PIN code Operation type Operation Select the numbers. Turn the Control knob or push it towards up or down. Move to the next digit. Push the Control knob towards right. -
Page 34: Deleting A Registered Bluetooth Device
Function of KDC-XBT8013U/ KDC-XBT8013UL KDC-X7013U/ KDC-X7013UL with KCA-BT200 (Optional Accessory) Bluetooth Setup Deleting a Registered Bluetooth device You can delete a registered Bluetooth device. Select Bluetooth device deletion mode > Select “MENU” “Device Delete”. For how to select Function Control item, refer to <Function Control>... -
Page 35: Setting A Voice Command For Category
Select “PB Name Delete” (Delete) Delete a voice tag Press the Control knob. Turn the Control knob to select “YES”, and then press the Control knob. Exit Phonebook name edit mode Press the [FNC] button. ⁄ • Audio sound is not output during voice tag registration. Setting a Voice Command for Category Add a voice tag to the phone number category... -
Page 36: Sms (Short Message Service)
Function of KDC-XBT8013U/ KDC-XBT8013UL KDC-X7013U/ KDC-X7013UL with KCA-BT200 (Optional Accessory) Bluetooth Setup SMS (Short Message Service) The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed. ¤ • To prevent car accidents, the driver should not read the SMS while driving. -
Page 37: Tv Control (Optional)
TV control (Optional) Basic Operation Selecting TV source Press the [SRC] button. Select the “TV” display. For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page Select the TV band and Video input Push the Control knob toward up. Each time you push the knob, TV bands and Video input alternate. -
Page 38: Basic Operations Of Remote Control
Audio control and others operations. Dual Zone control Dual zone system on and off [2-ZONE] Rear channel volume control KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL In Tuner source Band select Station select Recall preset stations In CD/USB source... - Page 39 Hands-free phone control Making a call Enter the dialing method selection mode Select a dialing method [38] Number dial input Operation type Input a digit. Input “+”. Input “#”. Input “*”. Clear the entered phone number. Make a call [DIRECT] Receiving a call Answer the call Switch between the private talk mode and the...
-
Page 40: Appendix
In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • You cannot operate iPod if “KENWOOD” or “✓” displayed on iPod. About USB device • When the USB device is connected to this unit, it can be charged up provided that this unit is powered. - Page 41 • A2DP is a profile designed to transfer the music from an audio player. • AVRCP is a profile designed to control playback and selection of music by an audio player. About KENWOOD “Music Editor” of PC application • “Music Editor” is recorded in the CD-ROM attached to this unit.
- Page 42 MNAL1: Dims the illumination constantly. MNAL2: Dims the illumination darker than MNA1. OFF: Does not dim the illumination. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL • DISP N/P Switches the panel display between positive or negative. In addition, you can reverse it in conjunction with the interior light.
-
Page 43: Laser Product
• The “AAC” logo is trademark of Dolby Laboratories. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. -
Page 44: Accessories/ Installation Procedure
Bluetooth antenna. About CD players/disc changers connected to this unit If the CD player/ disc changer has the “O-N” switch, set it to the “N” position. The functions you can use and the information that can be displayed may differ depending on the models being connected. -
Page 45: Connecting Wires To Terminals
Connect to the terminal that is grounded when either the telephone rings or during conversation. MUTE ⁄ To connect the Kenwood navigation system, consult your navigation manual. To car light control switch ILLUMI Car fuse... -
Page 46: Installation/Removing The Unit
Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the upper level. - Page 47 Accessory of KDC-XBT8013U/ KDC-XBT8013UL Installation the Microphone Unit Check the installation position of the microphone (accessory 5). Remove oil and other dirt from the installation surface. Install the microphone. Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like.
-
Page 48: Troubleshooting Guide
• Cannot set up Display. <Demonstration mode Setting> (page 26) is not turned off. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. - Page 49 If the “ERROR 99” code does not disappear, consult your nearest service center. CD-IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash...
- Page 50 Too Soft: Voice is too small and cannot be recognized. Too Loud: Voice is too large to be recognized. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Too Long: The word or utterance is too long to be recognized. No Phonebook: Data is not contained in the phone book.
-
Page 51: Specifications
: PBAP (Phonebook Access Profile) : OPP (Object Push Profile) : SYNC (Synchronization Profile) : A2DP (Advanced Audio Distribution Profile) : AVRCP (Audio/Video Remote Control Profile) CD player section Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling... - Page 52 (11 – 16V allowable) : 14.4 V Maximum Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 155 mm Weight : 1.4 kg Specifications subject to change without notice. KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL...