Using The Viewfinder; Using The Lcd Monitor - Panasonic Palmcorder MultiCam PV-GS50-K Operating Instructions Manual

Before Use
2
1
1
2
2
3
3 180x
4
90x
LCD/EVF SET
LCD BRIGHTNESS
LOW||||----HIGH
LCD COLOR LEVEL
LOW||||----HIGH
EVF BRIGHTNESS
LOW||||----HIGH
PUSH MENU TO RETURN

Using the Viewfinder

Before using the Viewfinder, adjust the field of view so that the
displays inside the Viewfinder become clear and easy to read.
1
Pull the Viewfinder.
2
Adjust the Viewfinder by sliding the Eyepiece
Corrector Knob

Using the LCD Monitor

With the LCD Monitor open, you can also record the picture while
1
watching it.
1
Set the [OFF/ON/MODE] Switch to [ON].
2
Put your finger on the [OPEN 4] Tab
underside of the LCD Monitor and pull the LCD
Monitor out about 90x in the direction of the arrow.
≥The Viewfinder goes off.
3
Adjust the LCD Monitor angle according to the
desired recording angle.
≥The LCD Monitor can rotate a maximum of 180x
vertical position to the upward direction and a maximum of 90x
4
monitor beyond these ranges will damage the Palmcorder.
Closing the LCD monitor
Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.
ª Adjusting Brightness and Color Level
When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to
[YES], the following items are displayed:
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD screen.
LCD Color Level [LCD COLOR LEVEL]
Adjusts the color saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
Adjust the brightness of the image in the Viewfinder.
1
Press the [PUSH] Dial and select the item you want to
adjust.
2
Rotate the [PUSH] Dial and increase or decrease the
number of the vertical bars on the Bar Indication.
≥The Bar Indication has 8 steps. A larger number of vertical
bars indicates stronger brightness or color saturation.
Increasing the Brightness of the Entire LCD Monitor
Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to
[BRIGHT].
≥These adjustments do not affect the recorded images.
≥For other notes, see page 95.
1
.
to the downward direction. Forcefully rotating the LCD
21
2
on the
3
from the