Using The Remote Controller - Panasonic Palmcorder MultiCam PV-GS50-K Operating Instructions Manual

Before Use
15˚
1
15˚
15˚
15˚
START/
DATE/ PHOTO
STOP
OSD TIME SHOT
COUNTER RESET TITLE
ZOOM
T
MULTI/
¥ REC A.DUB
P-IN-P
V W
/REW PLAY FF/
W
6 1 5
STILL ADV PAUSE STILL ADV
E D
;
2
INDEX STOP INDEX
K L
∫
SELECT
VAR. P.B.
SEARCH ZOOM
STORE
MENU
OFF/ON
ITEM
P.B.DIGITAL
ª Using the Remote Controller
1
Direct the Remote Controller at the Remote Control
Sensor on the Palmcorder and press the desired
button.
≥Distance from the Palmcorder: Within approximately 15 feet
(5 meters)
≥Angle: Approximately 15o in the vertical and horizontal
≥The above operating ranges are for indoor use. Outdoors, or under
strong light, the equipment may not operate properly even within
the above ranges.
≥Within 3 feet (1 meter) range, you can also use the Remote
Controller on the side (the LCD Monitor side) of the Palmcorder.
Selecting Remote Controller Modes
When two Palmcorders are used simultaneously, they can be
operated individually by selecting different Remote Controller
Modes.
≥If the Remote Controller Mode on the Palmcorder and Remote
Controller do not match, [REMOTE] is displayed.
1
Setting on the Palmcorder:
Set [REMOTE] on the [OTHER FUNCTIONS] Sub-Menu to the
desired Remote Controller Mode.
SET
Setting on the Remote Controller:
[VCR1]: Press the [D] Button and [∫] Button simultaneously.
[VCR2]: Press the [E] Button and [∫] Button simultaneously.
≥When the battery in the Remote Controller is replaced, the Mode is
automatically reset to [VCR1] Mode.
directions from the central axis
17
1
2