Notes - Panasonic Palmcorder MultiCam PV-GS50-K Operating Instructions Manual

Notes

≥Do not disconnect USB Connection Cable while
the operation light of Palmcorder is on. It may
freeze the software or destroy the data in transfer.
Please refer to the user manual of Palmcorder.
≥We recommend using the AC adaptor as the
power source for the Palmcorder when using USB
Connection Kit. Data may be lost If the battery
power is lost while transferring data.
≥G.726 may not recognize memory card files not
created by Palmcorder.
≥Do not delete the folders in memory card such as
picture folder, DPOF folder, title folder etc. Memory
card may not be recognized if folders are deleted.
≥When the Palmcorder is switched to the Card
Playback Mode while it is connected to the
personal computer, "PC ACCESSING" is displayed
on the Palmcorder and the operation mode of the
Palmcorder cannot be switched. In this case,
disconnect the USB Connection Cable. Switch the
operation mode of the Palmcorder and reconnect
the Cable.
≥If the Palmcorder is connected in the Card
Playback Mode, the [Removable disc] icon
representing the Memory Card drive is displayed
in [My Computer].
≥When the VCR Mode of the Palmcorder is
switched to the Card Playback Mode, a warning
message may be displayed. You may simply
ignore it.
≥When you are using Windows XP or Windows
2000, you may install or uninstall this software
after logging ON by setting the user name to
Administrator or to a user name having equivalent
authority.
≥If you use Windows 98SE/Me, the message, "File
is not found" may be displayed when the
Palmcorder is connected for the first time. Enter
the following paths to complete the connection: If
the message "MTDV98M1.pdr is not found" is
displayed, enter "C:/WINDOWS/system/
IOSUBSYS". If the message "MTDV98M1.sys is
not found" is displayed, enter "C:/WINDOWS/
system32/DRIVERS".
(The paths will differ depending on the environment
of your personal computer.)
≥When the Palmcorder is connected to the personal
computer on Windows 2000, these screens
described above may not be displayed.
≥If you use Windows 2000 and the Palmcorder is
not recognized by the personal computer when the
USB Driver is installed, update the USB Driver.
≥If you install the USB Driver while the USB
Connecting Cable is being connected, or if you
don't follow these Operating Instructions, the
Palmcorder will not be recognized correctly. In this
case, delete the USB Driver from
[Device Manager] as described below, uninstall
the USB Driver, and re-install it.
1
Set the Palmcorder to VCR Mode or Camera
Mode, connect it to the personal computer, and
delete [Panasonic DVC USB-SERIAL Driver
(COM X)] (or [Panasonic Serial USB Driver])
from [Device Manager].
2
Set the Palmcorder to Card Playback Mode and
delete [Panasonic DVC USB Driver] (or
[Panasonic DVC USB Driver Version 2.0]) (If
you use Windows Me/98SE, also delete
[Panasonic DVC Port Driver Version 2.0]).
ª About the SD Memory Card and
MultiMediaCard
SD Memory Card
The SD Memory Card (supplied) is virtually the
same size as a MultiMediaCard. It is an external
memory card that is available in larger capacities. It
has a write protect switch to prevent data writing and
card formatting, as well as a copyright protection
function.
≥SD Logo is a trademark.
MultiMediaCard
The MultiMediaCard is a compact, lightweight and
removable external memory card.
≥All other company and product names in the
operating instructions are trademarks or registered
trademarks of their respective corporations.
Files recorded on a SD Memory Card or
MultiMediaCard
It may not be possible to play back the files on this
Palmcorder recorded on and created by other
equipment or vice versa. For this reason, check the
compatibility of the equipment in advance.
78