Vcr Mode; Playing Back - Panasonic Palmcorder MultiCam PV-GS50-K Operating Instructions Manual

W.B / SHUTTER / IRIS
4
PUSH
MF / VOL / JOG
1
1
CAMERA
VCR
CARD
P .B
2
SEARCH BACK
LIGHT
MAGIC 2
PIX FADE
3

Playing Back

The recorded scene can be played back immediately after
recording.
1
Rotate the [OFF/ON/MODE] Switch and set the
Palmcorder in the VCR Mode.
≥The [VCR] Lamp lights up.
2
Press the [6] Button to rewind the tape.
≥Rewind the tape to the point where you want to start playback.
≥When the tape reaches the beginning, rewinding stops
automatically.
3
Press the [1] Button to start playback.
To Stop Playback
Press the [
≥If a cassette recorded with copyright protection signals is played
back, the screen becomes blue or mosaic-like noise patterns
appear.
ª Adjusting the Sound Volume
Until the [VOLUME] Indication
[PUSH] Dial
After the adjustment, press the [PUSH] Dial to make the [VOLUME]
Indication disappear.
3
To adjust the volume with the Remote Controller, press the [T] or [W]
Button to display the [VOLUME] Indication. Press the [T] Button to
increase the volume or press the [W] Button to decrease the volume.
The [VOLUME] Indication goes off 2 or 3 seconds after the
adjustment is finished.
≥When the Playback Zoom Function is in use, the sound volume
cannot be adjusted.
≥For other notes, see page 88.

VCR Mode

∫ 2
] Button .
3
4
. Then, rotate the [PUSH] Dial to adjust the volume.
42
1
appears, keep pressing the