Panasonic Palmcorder MultiCam PV-GS50-K Operating Instructions Manual page 58

4, 5, 1, 2
W.B / SHUTTER / IRIS
PUSH
MF / VOL / JOG
3, 5
MULTI
P-IN-P
1
PICTURE
640 640
640 640
No.25 100-0012
2 3 4
5
FILE SEARCH
PUSH MENU TO RETURN
ª To Select a Desired File and Play it Back
After setting the Palmcorder to the Card Playback Mode
(l 56).....
1
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD].
2
Slide the [TAPE/CARD/CARD MODE] Selector to
1, 2
[CARD MODE] until the desired type of data
CARD CARD
TAPE
MODE
indication appears.
3
Press the [MULTI] Button.
≥The files recorded on the Memory Card are displayed in
Multi-Picture Mode.
4
Rotate the [PUSH] Dial and select a desired file.
≥The selected file is marked with a red frame.
≥When 7 or more files have been recorded, rotate the [PUSH]
Dial to display the next file. The [6] Button or [5] Button
can be used instead of the [PUSH] Dial.
5
Press either the [PUSH] Dial or the [MULTI] Button.
≥The selected file is shown on the entire screen.
2
Picture Size (When [PICTURE] is selected at Step 2)
MPEG4 Picture Quality (When [MPEG4] is selected at Step 2)
3
File Number
4
Folder-File Number (When [PICTURE] is selected at Step 2)
File Name (When [MPEG4] is selected at Step 2)
ª Using File Search Mode
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[FILE SEARCH] >> [YES].
≥The file search screen
2
640
Rotate the [PUSH] Dial to select the desired number
of the file and then press it.
640
≥The selected number's file appears.
≥The same process can be performed using the short-cut menu
(l 26).
≥For other notes, see page 90.
1
5
appears.
58