Cleaning the Cooling System
Clean the air-intake screen from grass and debris before each
use.
1. Disengage the blade-control switch and move the
control levers to the N
apply the parking brake.
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the air-intake screen, air-cleaner cover, and
fan housing.
4. Clean the debris and grass from the parts.
5. Install the air-intake screen, air-cleaner cover, and fan
housing.
-L
position, and
EUTRAL
OCK
Fuel System
Maintenance
Replacing the Fuel Filter
Service Interval: Every 100 hours/Yearly (whichever comes
first) (more often under dusty, dirty
conditions).
1. Disengage the blade-control switch (PTO), move the
motion-control levers to the N
and set the parking brake.
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Replace the fuel filter
A
B
C
D
g027518
38
-L
EUTRAL
OCK
(Figure
51).
g027590
Figure 51
position,