Furuno SC-50 Operator's Manual page 23

7. Make a loop in the antenna cable as shown in the illustration below. Fasten
the antenna cable to the antenna mast with cable ties.
Coat with Three
Bond 1211 (supplied).
Fix antenna cable.
8. Coat bolt threads and nuts at the bottom of each antenna element with Three
Bond 1211.
9. Paint pedestal and support plate with anti-corrosive paint.
10. If necessary, attach the "bird-repellent fixtures" (supplied) to each antenna
element and the Antenna Cover S as shown below.
Fastening the antenna cable
Antenna element
1. INSTALLATION
Coat bolt threads with
Three Bond. Fasten bolt
with nuts and then coat
nuts with Three Bond also.
Bird-repellent fixture
1-11