Home > Advanced Settings > Dhcp Server > Dynamic Pool Settings - D-Link AirPremier N DAP- 2590 User Manual

DAP-590 User's Manual
Home > Advanced Settings > DHCP Server > Dynamic Pool
Settings
The DHCP address pool defines the range of the IP address that can be assigned to stations in
the network. A Dynamic Pool allows wireless stations to receive an available IP with lease time
control.
Function Enable/
IP Assigned From:
The Range of Pool
SubMask: All devices in the network must have the same subnet mask to
D-Link AirPremier N Dual Band PoE Access Point
Dynamic Host Configuration Protocol (DHCP) assigns dynamic
Disable:
IP addresses to devices on the network. This protocol simplifies
network management and allows new wireless devices to receive IP
addresses automatically without the need to manually assign new
IP addresses. Select Enable to allow the DAP-2590 to function as
a DHCP server.
Input the first IP address available for assignment on your
network.
Enter the number of IP addresses available for assignment. IP
(1-254):
addresses are increments of the IP address specified in the "IP
Assigned From" field.
communicate. Enter the submask for the network here.
Using the Configuration Menu
4