Dhcp Server > Dynamic Pool Settings - D-Link AirPremier N DAP-2690 User Manual

Section  - Configuration
The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless
stations to receive an available IP with lease time control. Once a user is finished, click the Save button to let the changes take effect.
Function Enable/
Dynamic Host Configuration Protocol (DHCP)
Disable:
assigns dynamic IP addresses to devices on
the network. This protocol simplifies network
management and allows new wireless devices to
receive IP addresses automatically without the
need to manually assign new IP addresses. Select
Enable to allow the DAP-2690 to function as a
DHCP server.
IP Assigned From:
Input the first IP address available for assignment
on your network.
The Range of Pool
Enter the number of IP addresses available for
(1-254):
assignment. IP addresses are increments of the IP
address specified in the "IP Assigned From" field.
SubMask:
All devices in the network must have the same subnet
mask to communicate. Enter the submask for the
network here.
Gateway:
Enter the IP address of the gateway on the network.
Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
WINS:
determines the IP address of a network computer that has a dynamically assigned IP address.
Enter the IP address of the Domain Name System (DNS) server. The DNS server translates domain names such as
DNS:
www.dlink.com into IP addresses.
D-Link DAP-690 User Manual
DHCP Server > Dynamic Pool Settings
1