D-Link AirPremier N DAP- 2590 User Manual page 32

DAP-590 User's Manual
SSID Visibility: Enable or Disable SSID visibility. Enabling this feature broadcasts
Security:
Encryption:
Key Type:
Key Size:
Key Index (1~4):
WPA Mode:
Cipher Type:
Group Key Update
PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the
PassPhrase:
RADIUS Server: When you select WPA-Enterprise, enter the IP address of the
RADIUS Port: Enter the RADIUS port.
D-Link AirPremier N Dual Band PoE Access Point
the SSID across the network, thus making it visible to all network
users.
The Multi-SSID security can be Open System, WPA-Personal, or
WPA-Enterprise. For a detailed description of the Open System
parameters please go to page 23. For a detailed description of the
WPA-Personal parameters please go to page 24. For a detailed
description of the WPA-Enterprise parameters please go to pages
25-26.
WMM:
Select Enable or Disable.
When you select Open System, toggle between Enable and
Disable. If Enable is selected, the Key Type, Key Size, Key Index
(1~4), Key, and Confirm Keys must also be configured.
Select HEX or ASCII.
Select 64 Bits or 128 Bits.
Select from the 1st to 4th key to be set as the active key.
Key:
Input up to four keys for encryption. You will select one of these keys
in the Key Index pull-down menu.
When you select either WPA-Personal or WPA-Enterprise, you
must also choose a WPA mode from the pull-down menu: AUTO
(WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use
different algorithms. AUTO (WPA or WPA2) allows you to use both
WPA and WPA2. In addition, you must configure Cipher Type, and
Group Key Update Interval.
Select Auto, AES, or TKIP from the pull-down menu.
Select the interval during which the group key will be valid. The
Interval:
default value of 1800 seconds is recommended.
corresponding field.
Confirm
When you select WPA-Personal, please re-enter the PassPhrase
entered in the previous item in the corresponding field.
RADIUS server. In addition, you must configure RADIUS Port and
RADIUS Secret.
Using the Configuration Menu
3