Home > Advanced Settings > Multi-Ssid - D-Link AirPremier N DAP- 2590 User Manual

DAP-590 User's Manual
Home > Advanced Settings > Multi-SSID
The device supports up to eight multiple Service Set Identifiers. You can set the Primary SSID in
the Basic > Wireless section. The SSID's factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network or to establish a new wireless network.
Enable Multi-SSID:
D-Link AirPremier N Dual Band PoE Access Point
Check to enable support for multiple SSIDs.
Band:
This read-only value is the current band setting.
Index:
You can select up to seven multi-SSIDs. With the Primary SSID, you
have a total of eight multi-SSIDs.
SSID:
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID's factory default
setting is dlink. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
Using the Configuration Menu
31