Home > Advanced Settings > Dhcp Server > Static Pool Setting - D-Link AirPremier N DAP- 2590 User Manual

DAP-590 User's Manual
Home > Advanced Settings > DHCP Server > Static Pool
Setting
The DHCP address pool defines the range of IP addresses that can be assigned to stations on the
network. A static pool allows specific wireless stations to receive a fixed IP without time control.
Function Enable/
Assigned IP:
Assigned MAC
D-Link AirPremier N Dual Band PoE Access Point
Dynamic Host Configuration Protocol (DHCP) assigns IP addresses
to wireless devices on the network. This protocol simplifies network
Disable:
management and allows new wireless devices to receive IP
addresses automatically without the need to manually assign IP
addresses. Select Enable to allow the DAP-2590 to function as a
DHCP server.
Use the Static Pool Settings to assign the same IP address to a
device every time you start up. The IP addresses assigned in the
Static Pool list must NOT be in the same IP range as the Dynamic
Pool. After you have assigned a static IP address to a device via its
MAC address, click Apply; the device will appear in the Assigned
Static Pool at the bottom of the screen. You can edit or delete the
device in this list.
Address:
Enter the MAC address of the device requesting association here.
Using the Configuration Menu
44