TH-50PX60U
6 Plasma panel replacement method
6.1.
Remove the Back cover
1. See Service Hint (Section 5)
6.2.
Remove the fan
1. Disconnect the relay couplers.
2. Remove the screws (×3
6.3.
Remove the rear terminal
cover
1. Remove the screws (×8
2. Remove the rear terminal cover.
each) and remove the fans.
, ×5
, ×2
).
6.4.
Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the couplers (P2, P5, P9, P10, P11, P12, P23
and P25).
2. Remove the screws (×6
3. Remove the screws (×9
8
) and remove the P-Board unit.
) on the back side.