Plasma Panel Replacement Method; Remove The Rear Cover; Remove The Rear Terminal Cover; Remove The P-Board - Panasonic TH-42PV70AZ Service Manual

TH-42PV70AZ / TH-42PV70H / TH-42PV70M / TH-42PV70MR / TH-42PV70MT
6

Plasma panel replacement method

6.1.

Remove the rear cover

1. See Service Hint (Section 5)
6.2. Remove the rear terminal
cover
1. Remove the screws (×9

2. Remove the rear terminal cover.

6.3.

Remove the P-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (P2, P5, P9, P11, P12 and P25).
3. Remove the screws (×9
, ×4 , ×2 , ×2 ).
) and remove the P-Board.
6.4.

Remove the PA-Board

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (PA3, PA4 and PA5).
3. Remove the screws (×3
6.5.

Remove the Tuner unit

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (H3, H4, H12, H51, DG1, and
DG5).
3. Remove the screws (×4
10
) and remove the PA-Board.
) and remove the tuner unit.