Makita AF500HP Technical Information page 9

R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-5 Magazine
DISASSEMBLING
Fig. 22
1. Sliding Upper rail in the direction designated
with black arrow, remove M4x12 Hex socket
head bolts (2pcs.).
2. Remove M5x14 Hex socket head bolt with which
Joint is fastened to Housing set.
M5x14
Hex socket head bolt
Fig. 24
Compression spring 5 and
Compression spring 6
Pusher
4. After removing Upper rail, remove Stopper and Compression
spring 3 from the Pusher.
5. Holding Pusher and lifting up Guide pipe, remove Pusher carefully
so as not to slung by Compression spring 5 and Compression spring 6.
Fig. 25
M4x8 H.S. button
head screw
7. Remove M4x8 H.S. button head screw. Pull off Slide door cap together with Nail guide holder
while holding Compression spring 4 so as not to spring out.
M3 Hex socket head screw
M4x12 Hex socket
head bolt (2pcs.)
Guide pipe
Upper rail
Compression spring 3
Stopper
Fig. 23
Joint
Upper rail
Joint
Nail guide holder
Compression
spring 4 (7pcs.)
3. Remove Upper rail while
pressing Pusher.
Pusher
Upper rail
Guide pipe
6. Remove Joint from
Guide pipe.
Slide door cap
P 9/ 14