Makita AF505 Instruction Manual
Pneumatic brad nailer
Hide thumbs
Also See for AF505:
- Instruction manual (69 pages) ,
- Parts breakdown (3 pages) ,
- Parts breakdown (3 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita AF505
Summary of Contents for Makita AF505
- Page 1 INSTRUCTION MANUAL Pneumatic Brad Nailer AF505 007179 IMPORTANT: Read Before Using.
-
Page 2: Specifications
For European countries only ･ Do not use on scaffoldings, ladders. EC Declaration of Conformity ENG905-1 Makita Corporation responsible Noise manufacturer declare that the following Makita typical A-weighted noise level determined machine(s): according to EN792: Designation of Machine: Pneumatic Brad Nailer... - Page 3 ENB109-5 Work area safety Keep work area clean and well lit. Cluttered or Pneumatic nailer/stapler safety • dark areas invite accidents. warnings Do not operate the tool in explosive atmospheres, • such as in the presence of flammable liquids, WARNING Read all safety warnings and all gases or dust.
- Page 4 Never hold or carry the tool with a finger on the from the parts. • trigger or hand it to someone in this condition. Ask Makita authorized service center for periodical • Accidental firing can cause serious injury. inspection of the tool.
-
Page 5: Installation
INSTALLATION CAUTION: Low air output of the compressor, or a long or • Selecting compressor smaller diameter air hose in relation to the nailing frequency may cause a decrease in the driving capability of the tool. Lubrication L /min 004295 To insure maximum performance, install an air set (oiler, 50 60 20 30... -
Page 6: Functional Description
FUNCTIONAL DESCRIPTION ASSEMBLY CAUTION: CAUTION: Always disconnect the hose before adjusting or Always disconnect the hose before carrying out • • checking function on the tool. any work on the tool. Load the same kind, size and uniform length of •... -
Page 7: Operation
Store the nose adapter in place when not in use. The Direction of exhaust air place for storage is on both sides of the tool and inside the carrying case. 1. Exhaust cover 1. Nose adapter 2. Place for storage 007189 The direction of exhaust air can be changed 360 degrees 007186... -
Page 8: Maintenance
1. Contact top 2. Contact arm 007303 007192 With tool disconnected, make daily inspection to assure Nails free movement of the contact element and trigger. Do not use tool if the contact element or trigger sticks or binds. Nail 004310 Handle nail coils and their box carefully. -
Page 9: Optional Accessories
Only use accessory or 1. Air filter attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Nails • Air hoses • Safety goggles •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com AF505-ENEU-0414...