Makita AF500HP Technical Information page 11

R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-7 Trigger base section
DISASSEMBLING
(1) Disassemble Magazine section together with Trigger section as per the left illustration in Fig. 13.
(2) Separate Trigger base section from Magazine section as illustrated in Figs. 29, 30 and 31.
Fig. 29
Adhesive tape
Magazine with
Trigger section
Cover Trigger base with adhesive
tape so that Pin 3 does not fall off
Trigger base during disassembly.
Fig. 30
Lock pin with
Compression spring 5
Knob
Remove Knob and Lock pin.
Trigger base section becomes
free from Magazine section.
Fig. 31
Adhesive tape
Taking off adhesive tape, remove Pin 3
from Trigger base.
The parts illustrated right can be
removed from Trigger base.
Pin 3
Adhesive
tape
1R266
Knob
1R274
Supporting Knob with 1R274,
remove Spring pin 2-8 by striking
1R266 applied on the Spring pin.
Compression spring 5
Remove Trigger base section
while paying attention not to
lose Compression spring 5.
Torsion spring 4
Magazine
Trigger base
Spring Pin 2-8
Tension spring 4
Idler guide
Link block
Trigger base
Link lever
1R266
Knob
Pull off 1R266 while pushing
the head of Lock pin which is
opposite side of Knob.
Idler
Spring pin 2-14
Pin 2
Trigger
Holes for Pin 3
P 11/ 14