Makita AF500HP Technical Information page 5

R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-1. Driver complete
DISASSEMBLING
Remove Driver complete and O rings in the order of Figs. 4 to 8.
Fig. 4
Pull off Top cap cover
by hand.
Top cap
cover
Top cap
Fig. 7
Pull off Cylinder together with Driver complete.
Remove Driver complete from Cylinder.
Housing set
ASSEMBLING
Take the disassembling step in reverse.
Note: 1) Apply Lubricant to O rings and fit them into each groove on Driver complete and Top cap. (Fig. 8)
2) Insert the round shape of Driver complete on the bottom of Cylinder, and face the vertical groove of Driver
complete to magazine, then set the assembled part in place as illustrated in Fig. 9.
Fig. 9
Cylinder
round shape
of Driver
complete
vertical groove of
Driver complete
Fig. 5
Vise
Driver complete Cylinder
Face the vertical groove of Driver complete
to Magazine.
Fix the hex portion of Top cap
with vise. And turn the machine
counterclockwise.
Top cap can be removed.
Hex portion of Top cap
Fig. 8
O ring 31
Magazine
Fig. 6
Rear Cushion is removed.
Cylinder
Rear cushion
Housing set
Remove O Rings.
Top cap
Driver complete
P 5/ 14
O ring 14