Chapter 1
1. 2. 1.
LED Explanation
You can check the extender's working status by following the LED Explanation table.
Name
RE
Wireless
Power
(Signal Strength)
Ethernet
1. 2. 2.
Port and Button Description
Ports or Buttons
(RANGE EXTENDER)
RESET Button
ETHERNET Port
Status
The extender is connected or not connected to the router.
On/Off
WPS connection is in process.
Blinking
The extender's wireless function is on.
On
The extender's wireless function is off.
Off
The extender is on.
On
The extender is off.
Off
Indicates the Wi-Fi connection between the extender and the
On
router. More lit LEDs indicate a better signal strength.
A device is connected to the Ethernet port
On
Off
No device is connected to the Ethernet port.
Press the WPS button on your host router, and immediately press the
the extender. The RE LED of the extender should change from blinking to solid on,
indicating successful WPS connection.
With the extender powered on, use a pin to press the RESET button until all the LEDs
turn on momentarily. Then release the button.
Connect your Ethernet-only device to the Ethernet port of the extender to join the
Wi-Fi network.
Get to Know About Your Extender
Indication
Description
button on
4