Steam Ironing - Beko BKK 2141 User Manual

Electronic steam iron
Table of Contents

Advertisement

Steam Ironing

1. Fill the iron as described in the
section of "How To Fill Water".
2. Connect the iron to a suitable
mains supply outlet
3. "Beep" sound would be heard
and the LCD would display all
logos for a Second then turn off.
6. Press "Temperature up / ON
OFF" button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and the
steam indicator ( ).
4. To select the higher tem-
perature setting (Cotton, Jeans &
Linen), See "How To Set Tempera-
ture".
5. Press the Steam Control Button
once the
icon will display on
the LCD and steam will come out.
6. The iron is now ready to use.
7. Press and hold the "Tempera-
ture up / ON OFF button" 3 sec
the LCD display will off with a
beep sound.
8. Disconnect the iron from mains
supply outlet.
9. When the iron gets cool com-
pletely, store it vertically in a safe
place.
Note:
- The steam function only working
at the higher temperature setting
(Cotton, Jeans & Linen).
- Double continuous beep sound
would be heard and LCD would
display the steam off indicator ( ),
if press the steam button for the
lower and medium temperature
settings (Acryl, Nylon, Silk, Poly,
Blend & Wool).
Burst Of Steam
This function provides extra
amount of steam to remove stub-
born wrinkles.
1. Fill the iron as described in the
section of "How To Fill Water".
2. Connect the iron to a suitable
mains supply outlet
3. "Beep" sound would be heard
and the LCD would display all logo
for a Second then turn off.
7. Press "Temperature up / ON
OFF" button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and the
steam indicator ( ).
4. To select the temperature set-
ting according to the recommen-
dation of the garment label, See
"How To Set Temperature".
5. The iron is now ready to use.
6. Press the Burst Of Steam But-
ton.
7. Steam will shoot from the holes
of the soleplate into the fabric
being ironed and removing the
wrinkles.
8. For stubborn wrinkles, wait a
few seconds before pressing the
Burst of Steam Button again. Most
wrinkles can be removed within
three presses.
9

Advertisement

Table of Contents
loading

Table of Contents