Table of Contents
Advertisement
9. Press and hold the "Tempera-
ture up / ON OFF button" 3 sec
the LCD display will off with a
beep sound.
10. Disconnect the iron from
mains supply outlet.
11. When the iron gets cool
completely, store it vertically in a
safe place.
Note:
- Only use the higher temperature
setting (Cotton, Jeans & Linen) for
the better result.
- It may be necessary to press the
burst of steam button a few times
to start this function. For optimum
steam quality, do not operate the
Burst of Steam more than three
times in succession.
Burst Of Steam In Vertical
Position
Warning:
Do not apply steam on any
clothes or fabrics that are
being worn by human or pets.
Temperature of steam is very
high.
This function provides extra
amount of steam to remove
wrinkles on delicate garments in
hanging position, hanging curtains,
or other hanging fabrics.
1. Fill the iron as described in
"How To Fill Water".
2. Connect the iron to a suitable
mains supply outlet
3. "Beep" sound would be heard
and the LCD would display all logo
for a Second then turn off.
4. Press "Temperature up / ON
OFF" button once, the LCD would
display the fabric type (ACRYL)
temperature indicators ( ) and the
steam indicator ( ).
5. To select the temperature set-
ting according to the recommen-
dation of the garment label, See
"How To Set Temperature".
6. The iron is now ready to use.
7. Hold the iron between 15 and
30 centimeters away from the
garment.
8. Press the Burst of Steam But-
ton.
9. Steam will penetrate into the
garment removing the wrinkles.
10. For Stubborn wrinkles, wait a
few seconds before pressing the
Burst of Steam Button again. Most
wrinkles can be removed within
three presses.
11. Press and hold the "Tem-
perature up / ON OFF button" 3
sec the LCD display will off with a
beep sound
12. Disconnect the iron from
mains supply outlet.
13. When the iron gets cool
completely, store it vertically in a
safe place.
10
Advertisement
Table of Contents
